A lookalike audience is a group of new people that Meta finds because they resemble a source audience you give it, such as your buyers. You build it in Ads Manager under Audiences from a source of at least 100 people. In 2026 most sales campaigns use Advantage+ audience, where a lookalike works as a suggestion: Meta starts from it but can show your ads to other people when it expects better results.
How does a lookalike audience work?
You give Meta a source audience. Meta says its system looks at information such as demographics, interests and behaviors of the people in that source, then finds other people who share similar qualities.
The rules that matter, from Meta's help pages:
- Source size. At least 100 people; Meta generally recommends a source of 1,000 to 5,000 people (create a lookalike audience).
- Size of the lookalike. You pick a percentage from 1% to 10%. It is a share of the combined population of your ad set's locations. 1% is the most similar group; a higher percentage is bigger and broader (Leads Center guide).
- Location. You no longer pick a country when you create a lookalike. Meta uses the locations of the ad set you put it in, so a new lookalike shows its estimated size only inside an ad set.
- No overlap with the source. People in the source audience are left out of the lookalike automatically.
- Time to build. A new lookalike can show "Populating" for up to 3 days. You can start ads right away; the audience grows as it fills.
- Limits. You can create up to 500 lookalikes from one source. Lookalikes are limited or unavailable for some ads about financial products, jobs and housing, and for audiences that include people under 18. Meta also notes that privacy rules may affect campaigns aimed at people in Europe.
Meta's developer documentation adds that a lookalike used in an ad set is refreshed every 3 days, so you don't need to rebuild it every week.
What changed with Advantage+ audience?
Older guides treat a lookalike as a fence: your ads only reach the people inside it. That is no longer the default.
- Advantage+ audience is applied automatically when it is available (Meta's setup guide). You add a lookalike under "Add suggestions". Meta shows ads to people who match your suggestion and to others when it is likely to improve performance, but never outside your audience controls (locations, minimum age, languages, excluded custom audiences) (audience controls and suggestions).
- Advantage+ lookalike (it used to be called lookalike expansion) lets Meta reach people beyond the percentage you chose. Meta turns it on automatically for new, duplicated and draft campaigns that use lookalikes built from website, app or customer list audiences.
- You can't exclude lookalike audiences when you use Advantage+ audience.
- To keep a hard limit, choose "Further limit the reach of your ads" (or "Further limit your audience") and untick "Use as a suggestion".
| Setup | What the lookalike does | When to use it |
|---|---|---|
| Advantage+ audience, lookalike as a suggestion | A starting point; Meta can go beyond it | Default for sales campaigns; most accounts start here |
| Original audience options, lookalike as a limit, Advantage+ lookalike on | A wider starting point that can still expand | You want more control but not a closed audience |
| Original audience options, lookalike as a hard limit | A fence: ads stay inside it | Tests where you must know exactly who saw the ad |
Meta says Advantage+ audience typically gets better results than the original audience options. Treat that as Meta's claim and check it in your own account with a test (see below).
Which source audience should you use?
The source tells Meta what a good customer looks like. Meta itself notes that you may get better results from an audience of your best customers than from one that includes all of them. A practical order, from strongest to weakest signal:
| Source | Signal | Size | Use it when |
|---|---|---|---|
| Customer list with a value column | Strongest: buyers, ranked by value | Small to medium | You have a clean list of past buyers |
| Recent purchasers from your Pixel | Strong | Medium | Your store has steady sales |
| Initiate checkout or add to cart | Medium | Larger | Purchases are still few |
| Website visitors or product page viewers | Medium to weak | Large | A new store with little sales data |
| Video viewers, Page or Instagram engagers | Weak for sales | Very large | Only for top-of-funnel tests |
Three habits keep sources useful:
- Keep them recent. If your product or price changed, old buyers may not look like your next buyers.
- Separate products. A buyer of a beauty tool and a buyer of a kitchen gadget may be very different people, even in the same store.
- Check your tracking first. A Purchase source is only as good as your Pixel and Conversions API data. Our guide to Meta Pixel with Google Tag Manager covers the setup.
How do you create a lookalike audience, step by step?
- Open Audiences in Meta Ads Manager (you can also create one from the audience section of an ad set).
- Select Create audience, then Lookalike audience.
- Choose the source. Pick a custom audience, your Pixel, an app or a Page. Saved audiences can't be a source.
- Choose the size. Pick how many lookalikes to create and move the slider. With several, Meta builds non-overlapping bands, such as 0–1%, 1–3% and 3–6% (lookalike audience sets).
- Select Create audience and wait for the status to change from "Populating" to "Ready" (you can launch before).
- Name it so your team can read it, for example
LAL | Purchasers | 1%. - Add it to an ad set. In a sales campaign with Advantage+ audience, go to the audience section, select "Add suggestions" and include the lookalike. Set your locations, minimum age and exclusions (such as current customers) as controls.
What is a value-based lookalike?
A normal lookalike treats every customer the same. A value-based lookalike looks for people similar to your highest-value customers.
To build one, upload a customer list with a customer value column: a number per customer, such as order value, number of orders or predicted lifetime value. Then use that custom audience as the source. You can also use your Pixel, app or catalog as a source.
Meta's guidance on when to use it:
- The "maximize value of conversions" goal uses up to 7 days to predict value. If your customers show their value within a week, that goal may be enough.
- If you need longer than a week to know who is valuable (for example, repeat buyers), a value-based lookalike fits better. It can look back up to 60 days.
Lookalike or broad: how do you test it?
Don't guess. Run a clean test:
- Pick one question, such as "Does a 1% purchaser lookalike as a suggestion beat no suggestion?"
- Keep everything else the same: creative, offer, budget, optimization event, locations.
- Use Meta's A/B test in Ads Manager or Experiments. Meta shows each version to a separate part of your audience and makes sure nobody sees both. Don't test by switching ad sets on and off by hand.
- Decide the metric before you start: cost per purchase, new-customer share, or return on ad spend over the same window.
- Run it long enough. Meta recommends at least 7 days (a test can run up to 30), and longer if your customers usually take more than a week to buy. A few sales can swing either way.
- Write down the result and repeat when your offer or creative changes a lot.
An A/B test tells you which setup gets cheaper results. It does not tell you if the sales would have happened without ads. For that, see our guide to incrementality testing.
Common problems and quick fixes
| Problem | Likely cause | What to try |
|---|---|---|
| Status stays "Audience not created" | Source too small | Use a longer time window or a broader event |
| Results look the same as broad | Advantage+ audience is using the lookalike as a suggestion only | Normal; test it as a hard limit if you need to know |
| Cost rises as you add budget | Audience too narrow for the spend | Use a wider percentage or let Meta expand |
| Every audience test looks average | The ad or offer is the problem, not the audience | Test new creative and angles first |
| Good clicks, few sales | Weak source (engagers, not buyers) | Rebuild from purchasers or a value list |
How to do this with SearchTheTrend
A lookalike can only come from your own data. SearchTheTrend can't seed one: no tool can turn another brand's ads into your audience. What it does help with is the creative you put in front of that audience.
- In Ads, search your niche and sort by days running or Ad Rank to see which hooks and formats brands keep live.
- Filter by format (UGC, demo, talking head) to choose what to test against your lookalike or broad ad set.
- Save candidates to Boards and brief your team.
For scaling once a test works, read our guides on scaling Facebook ads and Facebook ads for dropshipping.
FAQ
How big does a source audience need to be for a lookalike?
Meta needs at least 100 people in the source and generally recommends 1,000 to 5,000. A smaller list of your best customers can beat a big list of everyone who ever visited.
What lookalike percentage should I choose?
Meta's slider goes from 1% to 10% of the population in your ad set's locations. 1% is the closest match to your source; higher numbers give you more reach and less similarity, so test a close and a wide option.
Do lookalike audiences still work with Advantage+ audience?
Yes, but usually as a suggestion. Meta starts from the lookalike and can show your ads to other people when it expects better results; to keep the lookalike as a hard limit, choose the option to further limit your audience and untick use as a suggestion.
Can I build a lookalike from a competitor's customers or ads?
No. A lookalike source must be an audience you own, such as your customer list, Pixel visitors, app users or Page audience. Competitor ads can only help you choose the creative and angle you test.
Do I need to exclude the source audience from my lookalike?
No. Meta says people in the source audience are already left out of the lookalike. You may still exclude your current customers in a prospecting campaign.



